Glossy Metallic Tanzanite Blue Color Paint Protection Film (PPF)

This deep, dark shade of blue carries a unique charm and will completely revamp your vehicle, giving it a fabulous look. Made with high-grade polyurethane, it will provide excellent protection to your ride, shielding it against road debris, rock chips, tar, harsh UV rays, and chemicals from bird droppings, tree sap, and bug splatter. Your car’s exterior will maintain its factory finish as long as it is draped in this remarkable film.

Our Glossy Metallic Tanzanite Blue PPF Wrap is installed dry. You do not need a slip solution for it. Its air release channels help you draw out bubbles and small wrinkles easily with a squeegee. It is easy to maintain as well. Simply wash it periodically with a mild car shampoo and soft microfiber towels. It has a self-healing topcoat that repairs minor scratches upon exposure to heat. Hence, it remains in pristine condition throughout its lifetime. It also has hydrophilic properties that make it easier to clean water and mud from its surface.

Features

• Glossy Metallic finish delivers a smooth, high-end look
• Maded from durable, high-performance TPU material
• Acrylic-based self-adhesive ensures strong, lasting adhesion
• Heat-activated topcoat self-heals minor scratches and marks
• Hydrophobic surface resists UV rays, staining, and corrosion
• Scratch and corrosion resistant for long-term surface protection
• Designed for dry application for cleaner, faster installation
• Built-in air-release channels ensure bubble-free results
• Easy to install and stays easy to maintain afterward

 Specifications

• Application Method: Dry Application.
• Color: Tanzanite Blue.
• Finish: Glossy Metallic.
  
• Sizes available: 5ft x 10ft, 16ft, 33ft, and 49ft.
• Packaging: Roll. 

Structure

Functions

Recommended Uses

▲ Standard Size & Appearance

Physical properties 

▲ General Properties

Installation Conditions & Guidelines

To ensure optimal performance and long-lasting protection, please follow the installation instructions and environmental conditions below:

Recommended Installation Environment:

• Room Temperature: 25 ± 3°C
• Humidity: 50 ± 5% RH
• Cleanliness: Clean, dust-free environment with no visible airborne particles

Installation Instructions:

1. Inspect the installation area for any conditions that may negatively affect the process. Resolve any defects or issues before proceeding.
2. Thoroughly clean the vehicle's painted surface to remove contaminants such as mildew, oil, grease, stains, or other residues.
3. Cut the film to the appropriate size. Do not remove the protective liner until just before application.
4. Eliminate all bubbles, wrinkles, lifting edges, and other surface defects during installation.
5. If the installed film fails to meet the required standards, remove and replace it with a new piece.
6. Clean surrounding and adjacent surfaces to remove any excess installation solution.
7. For one week after installation, avoid washing the vehicle or exposing it to rain to allow the adhesive to fully bond with the paint surface for maximum adhesion.

Recommendations

Recommended application tools: Squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IRR thermometer, IRR heater
Application method: Standard methods for calendared films. No overstretching and overheating and Post heating is necessary.
Post-heating temperature: 110°C flat surfaces, 130°C curves, and overlaps
Aftercare: PH neutral, Avoid wax or solvents

CAUTION!

1. The images, colors, and finishes on the screen are approximate. For the real representation of the product always check the color swatch.

2. Most vinyl wraps are directional. Install the vinyl in the same direction across all panels. Applying the material in different directions can cause visible color differences due to light reflection.