Candy Metallic Gray Purple Color Paint Protection Film (PPF)

This premium PPF not only safeguards the exterior of your vehicle but also adds a distinctive shade to it. It represents a perfect balance of excellent quality and top-tier performance. It is made with high-grade polyurethane and has a solvent-based acrylic adhesive that forms a robust bond with the surface of your vehicle. 

Our Gray Purple PPF Wrap is also hydrophilic. Water slides off its surface without leaving marks or streaks. And if you want to clean stains from it, you simply have to wipe them with a microfiber cloth. Beyond its easy maintenance, our color PPF film delivers reliable protection. It acts as a durable shield against scratches, stone chips, UV rays, and environmental pollutants that can damage your car's original paintwork over time. Built to withstand the demands of daily driving and changing weather, it keeps your car looking sharp and well cared for. We offer five roll sizes. 

 Features

• Smooth, glossy, color finish.
• Made from durable material for high-performance protection.
• Durable, high-performance, self-adhesive film.
• Equipped with a heat-activated, self-healing topcoat.
• Hydrophobic with UV and stain-resistant properties.
• Offers supreme protection to the underlying surface
• Scratch-resistant and anti-corrosion. 
  
• Heat and UV resistant.
  
• Easy to apply and maintain.
  
• Acrylic-based, robust adhesive.
  
• Easy to slide and reposition. 
  

 Specifications

• Color: Gray Purple.
  
• Finish: Candy Metallic.
  
• Application Method: Dry Application.
• Sizes available: 5ft x 10ft, 16ft, 33ft, and 49ft.
• Packaging: Roll. 

Functions

Recommended Uses

▲ Standard Size & Appearance

Physical properties

▲ General Properties

Installation Conditions & Guidelines

To ensure optimal performance and long-lasting protection, please follow the installation instructions and environmental conditions below:

Recommended Installation Environment:

• Room Temperature: 25 ± 3°C
• Humidity: 50 ± 5% RH
• Cleanliness: Clean, dust-free environment with no visible airborne particles

Installation Instructions:

1. Inspect the installation area for any conditions that may negatively affect the process. Resolve any defects or issues before proceeding.
2. Thoroughly clean the vehicle's painted surface to remove contaminants such as mildew, oil, grease, stains, or other residues.
3. Cut the film to the appropriate size. Do not remove the protective liner until just before application.
4. Eliminate all bubbles, wrinkles, lifting edges, and other surface defects during installation.
5. If the installed film fails to meet the required standards, remove and replace it with a new piece.
6. Clean surrounding and adjacent surfaces to remove any excess installation solution.
7. For one week after installation, avoid washing the vehicle or exposing it to rain to allow the adhesive to fully bond with the paint surface for maximum adhesion.

Recommendations

Recommended application tools: Squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IRR thermometer, IRR heater
Application method: Standard methods for calendared films. No overstretching and overheating and Post heating is necessary.
Post-heating temperature: 110°C flat surfaces, 130°C curves, and overlaps
Aftercare: PH neutral, Avoid wax or solvents

Durability:

Actual performance life will depend on substrate preparation, exposure conditions and maintenance of the marking. For instance, in areas of long high temperature exposure and in industrially polluted areas or high altitudes, exterior performance will be decreased.

CAUTION!

1. The images, colors, and finishes on the screen are approximate. For the real representation of the product always check the color swatch.