High Glossy Light Blue Color Paint Protection Film（PPF）

It has a beautiful, high-energy blue shade that is impossible to ignore. You will not only be mesmerized by the color but by its amazing features as well. Made with high-grade polyurethane, it provides serious protection to the original paintwork of your ride, guarding it against chips, scratches, salt, road debris, and harsh UV rays. It bravely fights the detrimental elements that your ride has to endure daily on the road. 

It has a pressure-sensitive acrylic adhesive that forms a robust bond with the exterior of your ride without lifting or peeling off throughout its lifetime. It does not fade, yellow, or develop an orange peel with time. It has a self-healing topcoat that repairs minor scratches with heat. It also has a hydrophilic layer that makes it easy to clean water, dirt, mud, and other contaminants, keeping our PPF in flawless condition.

Features

• Engineered from high-grade TPU for maximum durability and flexibility
• Features a self-healing topcoat that eliminates fine scratches with heat exposure
• Offers advanced protection against UV rays, corrosion, and staining
• Delivers a luxurious mirror-smooth gloss finish
• Dry application compatibility streamlines the installation process
• Air-release technology ensures a flawless, bubble-free result
  
• Designed for precision fit and effortless maintenance

 Specifications

• Application Method: Dry Application.
• Color: Light Blue.
• Finish: High Glossy.
  
• Sizes available: 5ft x 10ft, 16ft, 33ft, and 49ft.
• Packaging: Roll. 

Structure

Functions

Recommended Uses

▲ Standard Size & Appearance

Physical properties 

▲ General Properties

Installation Conditions & Guidelines

To ensure optimal performance and long-lasting protection, please follow the installation instructions and environmental conditions below:

Recommended Installation Environment:

• Room Temperature: 25 ± 3°C
• Humidity: 50 ± 5% RH
• Cleanliness: Clean, dust-free environment with no visible airborne particles

Installation Instructions:

1. Inspect the installation area for any conditions that may negatively affect the process. Resolve any defects or issues before proceeding.
2. Thoroughly clean the vehicle's painted surface to remove contaminants such as mildew, oil, grease, stains, or other residues.
3. Cut the film to the appropriate size. Do not remove the protective liner until just before application.
4. Eliminate all bubbles, wrinkles, lifting edges, and other surface defects during installation.
5. If the installed film fails to meet the required standards, remove and replace it with a new piece.
6. Clean surrounding and adjacent surfaces to remove any excess installation solution.
7. For one week after installation, avoid washing the vehicle or exposing it to rain to allow the adhesive to fully bond with the paint surface for maximum adhesion.

Recommendations

Recommended application tools: Squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IRR thermometer, IRR heater
Application method: Standard methods for calendared films. No overstretching and overheating and Post heating is necessary.
Post-heating temperature: 110°C flat surfaces, 130°C curves, and overlaps
Aftercare: PH neutral, Avoid wax or solvents

CAUTION!

1. The images, colors, and finishes on the screen are approximate. For the real representation of the product always check the color swatch.

2. Most vinyl wraps are directional. Install the vinyl in the same direction across all panels. Applying the material in different directions can cause visible color differences due to light reflection.