High Glossy Pink Sakura Vinyl Wrap
High Glossy Pink Sakura Vinyl Wrap
Structure
Our products are made up of four layers. The outermost layer is the protection layer, which shields the vinyl underneath. Next is the high-grade polymeric vinyl, which is backed by a pressure-sensitive acrylic adhesive. The final layer is a high-quality 130um plastic liner.
▲ Standard Size & Appearance
Classification | Unit | Spec | Remark | |
---|---|---|---|---|
Thickness | Top protected film | um | 36±2% | PET/PVC |
Surface materials | um | 115±2% | High-grade PVC-Polymeric | |
Glue | um | 30±2% | High-quality Solvent-based | |
Release liner | um | 180±2%(paper)/ 130±2%(plastic) |
- | |
Surface | - | Opaque | - | |
Width | mm | 1520±0. 01% | - | |
Length | mm | 1800+1% | - |
Physical properties
▲ General Properties
Features | Test Method | Results | |||
---|---|---|---|---|---|
Release force N/25mm |
25℃ and 50% | 0.12 | |||
Initial tack g/25mm |
under 26℃ and 64%, GB31125-2014 | 987 |
|||
Peel Strength N/25mm |
25℃and 42%, GB/T2792-1998 | 7.25 |
|||
Holding power(h) | 25℃ and 50%, GB/T4851-1998 | 72.09 | |||
Shelf life | stored in +10°C to +20°C, relative humidity 50%, in original package, away from direct sunlight, clean and dry place | 2 years | |||
Application temperature | / | +20℃ to +30℃ | |||
Aging Test 1 | 7 days under 65°C | No adhesive residue with heat | |||
Aging Test 2 | 10 days under 65°C | No adhesive residue without heat | |||
Shrinkage | / | less than 4% |
Features Of High Glossy Pink Sakura
- Long-lasting and durable
- UV resistant, waterproof, and tear-resistant
- Easy to install and remove - Leaves no residue behind on the surface
- Pre-masked to make application simple and fast
Important Tip: If you don't clean your car well, the vinyl will not stick as well. This is important for any kind of wrap but especially true with the high gloss finish.
Recommended application tools: Squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IRR thermometer, IRR heater
Application method: Standard methods for calendered films. No overstretching and overheating and Post heating is necessary.
Post-heating temperature: 110°C flat surfaces, 130°C curves, and overlaps
Aftercare: PH neutral, Avoid wax or solvents
CAUTION!
The images, colors, and finishes on the screen are approximate. For the real representation of the product always check the color swatch.