High Glossy Purple Pizzazz Color Paint Protection Film(PPF)
High Glossy Purple Pizzazz Color Paint Protection Film(PPF)
Couldn't load pickup availability
This dramatic, bold shade will instantly grab attention on the road, making your ride the talk of the town. It is not just an ordinary PPF film with an eye-catching appearance; it's a showstopper that also gives excellent performance when it comes to protecting your car from everyday hazards. Rock chips, road debris, tar, UV rays, and other detrimental elements are kept from leaving unsightly marks and scratches on the original paintwork, keeping it in pristine condition for many years.
Our Purple Pizzazz PPF Wrap boasts a sturdy construction. It has a hydrophilic layer that allows water to slide off, making it easy to clean. Its self-healing topcoat enables quick removal of minor scratches from its surface upon exposure to heat. Underneath, it has a smooth layer of pressure-sensitive acrylic adhesive that forms a strong bond with the surface and helps in the bubble-free, dry installation of the film. Its color remains vibrant throughout its lifetime, offering not only a premium, distinctive appearance but also great functionality.
Features
- Made from durable TPU with strong acrylic-based adhesive for long-term performance
- Self-healing topcoat activates with heat to erase light scratches and swirl marks
- Excellent resistance to UV rays, stains, corrosion, and daily wear
- High-gloss, mirror-smooth finish enhances the vehicle's premium look
- Dry application compatible for a mess-free installation
- Air-release channels provide a bubble-free, smooth surface
- Hydrophilic surface helps repel dust and moisture
- Easy to apply, reposition, and maintain
Specifications
- Application Method: Dry Application.
- Color: Purple Pizzazz.
- Finish: High Glossy.
- Sizes available: 5ft x 10ft, 16ft, 33ft, and 49ft.
- Packaging: Roll.
Structure

Functions

Recommended Uses

▲ Standard Size & Appearance
| Classification | Unit | Specs | Remarks | |
|---|---|---|---|---|
| Thickness | Top protected film | um | 50±5% | PET |
| Self-healing Layer | um | 10±5% | / | |
| Face Film | um | 60±3 | Thermoplastic Polyurethane | |
| Color Layer | μm | 17±0.5 | / | |
| Base Color Layer | μm | 70±0.5 | Termoplastic Polyurethane | |
| Acrylic Adhesive | um | 35±2 | Solvent-based | |
| Release liner | um | 75±5% | Satin Semi-transparent White | |
| Width | m | 1.52±1% | 4.98ft | |
| Length | m | 15±1% | 49.21ft | |
Physical properties
▲ General Properties
| Features | Test Method/Conditions | Data | |||
|---|---|---|---|---|---|
| Gloss(60°) | GB 8807 | ≥90 | |||
| Water Contact Angle | DL/T864 Appendix A | ≥90° | |||
| Hardness | GB/T 6739 | ≥85A | |||
| Elongation at Break | GB/ T1040 | ≥350% | |||
| Coating Elongation at Break | GB/ T1040 | ≥85% | |||
| Tensile Strength | GB/ T1040 | ≥18 (mpa) | |||
| Initial Adhesion | FTM 9 | ≥ 8N/25mm | |||
| 24h 180° Peel Force | GB/T 2792 | ≥ 12N/25mm | |||
| Storage Aging Peel Force | GB/T 2792 | ≥ 10N/25mm | |||
| Application Aging Peel Force | GB/T 2792 | ≥ 16N/25mm | |||
| Peel Force | GB/T 2792 | ≤ 0.3N/25mm | |||
| Dimensional Stability (MD) | FTM 14 | ≤ 0.5mm | |||
| Dimensional Stability (CD) | FTM 14 | ≤ 0.4mm | |||
| Scratch Repair | (0.1mm) Copper brush&Heat gun | Repair Time≤ 3minutes | |||
| Stain Resistance | GB/T 16422.2 | No visible water stain deposits | |||
| Hydrolysis Resistance | QC/T 1171-2021 | stable for over 200h | |||
| Acid & Alkali Resistance | Exposure to 10% hydrochloric acid and 0.1 mol/L sodium hydroxide solution for 24h | No visual coating defects | |||
| Yellowing ΔE | QUV Method 2000h | ≤2 | |||
| Application Termperature | / | +20℃ to +30℃ | |||
| ServiceTemperature | / | -50℃ to +110℃ | |||
| Recommended Shelf Life | 15-25°C or 59-77° F and 45-50% Humidity | 2 years | |||
| Warranty Period | / | 3-5 years | |||
Installation Conditions & Guidelines
To ensure optimal performance and long-lasting protection, please follow the installation instructions and environmental conditions below:
Recommended Installation Environment:
- Room Temperature: 25 ± 3°C
- Humidity: 50 ± 5% RH
- Cleanliness: Clean, dust-free environment with no visible airborne particles
Installation Instructions:
- Inspect the installation area for any conditions that may negatively affect the process. Resolve any defects or issues before proceeding.
- Thoroughly clean the vehicle's painted surface to remove contaminants such as mildew, oil, grease, stains, or other residues.
- Cut the film to the appropriate size. Do not remove the protective liner until just before application.
- Eliminate all bubbles, wrinkles, lifting edges, and other surface defects during installation.
- If the installed film fails to meet the required standards, remove and replace it with a new piece.
- Clean surrounding and adjacent surfaces to remove any excess installation solution.
- For one week after installation, avoid washing the vehicle or exposing it to rain to allow the adhesive to fully bond with the paint surface for maximum adhesion.
Recommendations
Recommended application tools: Squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IRR thermometer, IRR heater
Application method: Standard methods for calendared films. No overstretching and overheating and Post heating is necessary.
Post-heating temperature: 110°C flat surfaces, 130°C curves, and overlaps
Aftercare: PH neutral, Avoid wax or solvents
CAUTION!
1. The images, colors, and finishes on the screen are approximate. For the real representation of the product always check the color swatch.
2. Most vinyl wraps are directional. Install the vinyl in the same direction across all panels. Applying the material in different directions can cause visible color differences due to light reflection.
Shipping Info
Shipping Info
Standard Shipping
United States
Free U.S. Shipping
processing time: 3-7 working days.
shipping time: 10-15 working days.
Expedited Shipping
United States
Shipping Cost: $80
processing time: 3-5 working days.
shipping time: 5-7 working days.
Payment Info
Payment Info
We accept the following payments.
Paypal
You can complete your payment using your PayPal account.
We accept payments in many currencies.
Credit or Debit Card
We accept the following credit and debit cards.
Note: For security purposes, we will not save any of your credit card data.
Return & Refund Policy
Return & Refund Policy
We accept order cancellation before the product is shipped or produced. If the order is cancelled you will get full refund. We cannot cancel the order if the product is already shipped out.
Please contact us via email Sales@velosin.com before returning or exchanging items.
Returns
Velosin offers a 30-day return policy, which means you have 30 days after receiving your item to request a return or exchange. We do not accept returns after 30 days. Please ensure you familiarize yourself with the policy below prior to your purchase.
*If the product is returned for non-quality problems, the return delivery fee will need to be paid by the customer.
*If customers receive damaged products, they do not need to bear the return shipping cost.
*If the product is not wanted by the customer or was purchased by mistake, the return delivery fee will need to be paid by the customer.
*If customers receive incorrect products, they do not need to bear the return shipping cost.
Please kindly note:
To be eligible for a return, your item must be in the same condition that you received it, unworn or unused, with tags, and in its original packaging. You’ll also need the receipt or proof of purchase.
To start a return, you can contact us at Sales@velosin.com
If your return is accepted, we’ll send you a return shipping label, as well as instructions on how and where to send your package. Items sent back to us without first requesting a return will not be accepted.
How to return
1. Email Sales@velosin.com with your order number, the item(s) you wish to return, and the reason. Attach photos showing the items in their original condition, including packaging and tags.
2. Proof of purchase is required.
3. We will provide you with the return address via email. Please do not send your return to the address on the package.
4. Share the return tracking number with us for faster processing.
5. Allow 2-5 business days for our warehouse to inspect the returned items.
Refunds
We will notify you once we’ve received and inspected your return, and let you know if the refund was approved or not. If approved, you’ll be automatically refunded on your original payment method within 10 business days. Please remember it can take some time for your bank or credit card company to process and post the refund too.
If more than 15 business days have passed since we’ve approved your return, please contact us at Sales@velosin.com
Late or missing refunds
If you haven’t received a refund yet, first check your bank account again. Then contact your credit card company, it may take some time before your refund is officially posted. Next contact your bank. There is often some processing time before a refund is posted. If you’ve done all of this and you still have not received your refund, please contact us at Sales@velosin.com
