Matte Midnight Purple Color Paint Protection Film （PPF）

It is an amazing shade of purple that is dipped in mystery due to its completely muted, lusterless matte finish. It doesn’t just cover your vehicle; it redefines it. Beneath the fabulous beauty of this PPF Film lies advanced engineering. It is built with multi-layered polyurethane technology that offers serious protection without sacrificing style. You don’t have to worry about rock chips, road debris, tar, and other contaminants leaving unsightly marks and scratches on the paintwork of your ride.

Our Matte Midnight Purple PPF Wrap has a hydrophilic topcoat that repels water and resists stains, while the self-healing layer allows light scratches and swirls to repair with a touch of heat. It also has a UV-resistant color layer that maintains vibrancy without fading. We have equipped this superb PPF with a high-tack, pressure-sensitive acrylic adhesive that makes sure it conforms smoothly over curves and edges. And thanks to its dimensional stability, it won’t shrink, bubble, or peel. This is a dry install film, making application hassle-free. If you want presence, mystery, and pure matte power, this is the PPF for you.

Features

• Smooth, matte finish for a sleek appearance
• Made from high-performance, durable and Eco-friendly TPU material
• Self-adhesive film with strong, acrylic-based adhesive
• Heat-activated self-healing topcoat to repair minor scratches
• Hydrophobic surface that resists UV rays, stains, and corrosion
• Scratch-resistant and anti-corrosion for long-term surface protection
• Suitable for dry application, offering a cleaner, more efficient installation process
• Equipped with air-release channels for bubble-free results
• Easy to apply, slide, reposition, and maintain
  

 Specifications

• Application Method: Dry Application.
• Color: Midnight Purple.
• Finish: Matte.
  
• Sizes available: 5ft x 10ft, 16ft, 33ft, and 49ft.
• Packaging: Roll. 

Structure

Functions

Recommended Uses

▲ Standard Size & Appearance

Physical properties 

▲ General Properties

Installation Conditions & Guidelines

To ensure optimal performance and long-lasting protection, please follow the installation instructions and environmental conditions below:

Recommended Installation Environment:

• Room Temperature: 25 ± 3°C
• Humidity: 50 ± 5% RH
• Cleanliness: Clean, dust-free environment with no visible airborne particles

Installation Instructions:

1. Inspect the installation area for any conditions that may negatively affect the process. Resolve any defects or issues before proceeding.
2. Thoroughly clean the vehicle's painted surface to remove contaminants such as mildew, oil, grease, stains, or other residues.
3. Cut the film to the appropriate size. Do not remove the protective liner until just before application.
4. Eliminate all bubbles, wrinkles, lifting edges, and other surface defects during installation.
5. If the installed film fails to meet the required standards, remove and replace it with a new piece.
6. Clean surrounding and adjacent surfaces to remove any excess installation solution.
7. For one week after installation, avoid washing the vehicle or exposing it to rain to allow the adhesive to fully bond with the paint surface for maximum adhesion.

Recommendations

Recommended application tools: Squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IRR thermometer, IRR heater
Application method: Standard methods for calendared films. No overstretching and overheating and Post heating is necessary.
Post-heating temperature: 110°C flat surfaces, 130°C curves, and overlaps
Aftercare: PH neutral, Avoid wax or solvents

CAUTION!

1. The images, colors, and finishes on the screen are approximate. For the real representation of the product always check the color swatch.

2. Most vinyl wraps are directional. Install the vinyl in the same direction across all panels. Applying the material in different directions can cause visible color differences due to light reflection.