Rainbow Metallic Majestic Dark Gray Vinyl Wrap
Rainbow Metallic Majestic Dark Gray Vinyl Wrap
Structure
Our products are composed of 4 layers, starting from the outer edge is 1st layer that is to protects the underneath vinyl and is called the protection layer. After that, the high-grade polymeric vinyl is supported with pressure-sensitive acrylic adhesive. Lastly, there is a layer of High Quality 130um Plastic Liner.
Material
- High Grade Polymeric Calendared Vinyl Film
- Fashionable, Stunning Color
- With Air Release Channel
- Bubble-free Application
- Slideable; Repositionable
Medium Stretchable
The Maximum is 30 %
Functions
Recommended Uses
▲ Standard Size & Appearance
Classification | Unit | Spec | Remark | |
---|---|---|---|---|
Thickness | Top protected film | um | 36±2% | PET/PVC |
Surface materials | um | 130±2% | High-grade PVC-Polymeric | |
Glue | um | 30±2% | High-quality Solvent-based | |
Release liner | um | 180±2%(paper)/ 130±2%(plastic) |
- | |
Surface | - | Opaque | - | |
Width | mm | 1520±0. 01% | - | |
Length | mm | 1800+1% | - |
Physical properties
▲ General Properties
Features | Test Method | Results | |||
---|---|---|---|---|---|
Release force N/25mm |
25℃ and 50% | 0.12 | |||
Initial tack g/25mm |
under 26℃ and 64%, GB31125-2014 | 1360 | |||
Peel Strength N/25mm |
25℃and 42%, GB/T2792-1998 | 7.05 | |||
Holding power(h) | 25℃ and 50%, GB/T4851-1998 | 72.09 | |||
Shelf life | stored in +10°C to +20°C, relative humidity 50%, in original package, away from direct sunlight, clean and dry place | 2 years | |||
Time Limits | Must use it within 3 Months after you receive the wrap film | 3 Months | |||
Application temperature | / | +20℃ to +30℃ | |||
Aging Test 1 | 7 days under 65°C | No adhesive residue with heat | |||
Aging Test 2 | 10 days under 65°C | No adhesive residue without heat | |||
Shrinkage | / | less than 4% |
Recommended application tools: Squeegee, buffer, knife, masking tape, heat gun, magnets, gloves, IRR thermometer, IRR heater
Application method: Standard methods for calendered films. No overstretching and overheating and Post heating is necessary.
Post-heating temperature: 110°C flat surfaces, 130°C curves, and overlaps
Aftercare: PH neutral, Avoid wax or solvents
CAUTION!
The images, colors, and finishes on the screen are approximate. For the real representation of the product always check the color swatch.